HOME > Products > STEM®FILTER

title

STEM FILTER

Specially solidified and molded activated carbon type stem cartridge
Materials: coconut-shell activated carbon, polyolefin

Features

Structure

Primary filter layer...Polyolefin thermally bonded bicomponent fiber (ES fiber).

Adsorption layer...Activated carbon is solidified and molded utilizing the ES fiber, and impurities are absorbed. Coconut shell activated carbon as a raw material is produced by Steam Activation, and has a high adsorption capacity.

Secondary filter layer...Fine particles are trapped by the CP filter.

Advantages

  • Pressure drop is low, and a high filtration flow rate may be achieved.
  • The contact area with the activated carbon is large, and adsorption capacity is high.
  • The filter service life is long, requiring fewer filters in the long run.
  • There is no shedding, and no contaminant unloading or channeling.
  • All raw materials used in STEM 3 type are limited to those conforming to the standard requirements by the Japan Food Sanitation Law.

Applications

画像

General Industry

Pure water etc.

画像

Chemicals

Ozone etc.

画像

Food and Beverages

Potable water etc.

画像

Electronics

Pure water, Printed-circuit boards, etc.

*

Description of each characteristic data is based on our original test methods. The actual data may differ slightly from the data shown here by use conditions.

*

Please be reminded that we may change this content without advance notice.

*

Copyright JNC Filter Co., Ltd. All rights reserved. No reproduction or republication without written permission.

Copyright © 2015 JNC FILTER CO,LTD. All Rights Reserved.